Setting up Linksys PAP2
From Voxalot FAQ
If you want to register your PAP2 for use with Voxalot, you need to enter your Voxalot account details in the Proxy and Registration section of your hardware. (The settings in the screenshots are entered on the Line 2 tab, you can also enter them on the Line 1 tab if you wish).
You will need to define the following settings:
|
Note: Australian members should use au.voxalot.com and European members should use eu.voxalot.com
You will also need to change your dial plan. This dial plan string will work best.
([x*][x*].)
Contents |
VoXalot Specific Settings
VoXalot Specific Settings (when using ports 80, 443, 2060, 3060, 4060)
Change the port highlighted in blue appropriately (example below uses 80)
STUN Settings (optional but recomended)
Depending on the type of setup and NAT you're behind try either of the three below. Start with Option 1 and migrate to Option 2 and 3 if you're experiencing dropped calls or audio loss.
Option 1
Option 2
Option 3
- As recommended by boatman
Other General Settings (optional but recomended)
 |
Languages: |
English |
